Specification: 1. Input Voltage: DC10-14V 2. Standby Current: <5MA 3. RF Frequency: 433MHZ 4. RF Working mode:Super heterodyne receiver 5. Receiver Sensitivity: >90dBm 6. Remote Control Distance: >100 meter(In open environment) 7. Decoding Way: MCU Software decoding 8. Can store the number of remote control:50 9. Support remote control type: Fixed code, learning code 10. Channel: 1CH 11. Multiple working modes: (Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched,Delay off) 12. Wiring Method:Fixed wiring terminal 13. Working Voltage: DC12V 14. Output Current: 10A 15. Rated load:10A 250VAC / 10A 125VAC, 10A 30VDC / 10A 28VDC 16. Output:Normally open,Common,Normally closed 17. Dimension:3.5cm*3cm*1.6cm Working/output way: 1.Jog: Press the learning button then release, set the mode from the system automatically working mode to action mode, wait for a while, when the board LED off, said it is into the learning state, press the remote control, the system received the signal. The LED flashes 5 times and goes off again. After 3S delay, LED light marked learning success, the system automatically withdraw from the learning state. 2.Self-locking: Press the learning button, then release, press 2 times, the system automatically set to self-locking mode, wait for a while, LED off, it is into the learning state, press the remote control, LED flash 5 times Off. 3S after the delay, LED light learning success. 3.Interlock: press the learning button, then release, press 3 times in succession, the system is set to interlock mode. 4.Delay: Press remote control relay pull-in,release the remote control and begin timekeeping,after 5s,10s,15s will automatically close the relay Description: 1. Press the learning code .the indicator flash ,loosen your finger ,press any button of the remote control the indicator flash 2 times and off .it mean you learn it successfully . 2. It can learn more than 12 PCS 2262 or 1527 chip with the different code wireless 433MHz remote control 3. Remove/clean :press the learning button about 8 seconds , the indicator turn on to off, it means the information that you keep have been removed successfully . Package included: 1 x 12V 1CH 433MHz Wireless Relay Switch Receiver
Items will normally be processed on the next busiess day after order is procesed. A shipment tracking number and notification will be sent to the customer once items are dispatched. Bargain Flash Store cannot be held responsible for any delays in delivery caused by freight companies or intermediaries used.
The customer is responsible for the order once the package arrives at the supplied delivery address. Bargain Flash Store cannot be held responsible if the package goes missing once delivered. If any items are received damaged, the customer must notify Bargain Flash Store within 48 hours of receiving them. Please see returns policy below.
Bargain Flash Store cannot be held responsible for items that do not arrive to the customer due to errors made by the customer when entering the address details. Also note that the address must be accessible to courier drivers and if no shipping instructions are left then Bargain Flash Store needs to ensure that there is someone to receive the package.
Please also note that deliveries made to business addresses or at a place of work are considered received once they arrive at the address. It is the customer’s responsibility to ensure the item is safely received.
If you change your mind on a product purchased you are entitled to a refund on the purchase price (freight costs are not refunded) if you contact Bargain Flash Store within 21 days from date of receiving the product and advise Bargain Flash Store of the reason for the change of mind. You are entitled to a full refund of the purchase price if you provide us with the proof of purchase, all packaging/tags/instructions are attached to the item(s) and the product is in the same condition as when it was received (including all tags, packaging etc). Please note that the customer is responsible for the cost of returning the product to the address provided by Bargain Flash Store to the customer. Bargain Flash Store will provide a full refund of the purchase price within 21 days on confirmation of the product being received by Bargain Flash Store from the customer.
In the event of any items received being damaged or incorrect items received the following policy applies:
A. The customer is obliged to send through (photographic) evidence and a detailed explantion of the issue to Bargain Flash Store directly. These photographs need to be (digitally) date marked and sent to firstname.lastname@example.org citing the name, email address, and order number. Upon inspection/review Bargain Flash Store will decide upon one of three options:
I. The damage warrants a discount;
II. The damage warrants a refund; or
III. A new item will be sent out.
B. Refunds are applicable for the items only and do not include the price paid for shipping.
C. Bargain Flash Store reserves the right to deviate from the above if applicable to an individual case.