Description : 360 Degree Mini Recessed PIR Ceiling Occupancy Motion Sensor Detector Switch The product adopts good sensitivity detector, integrated circuit. It gathers automatism, convenient safe, saving-energy and practical functions. Utilizes the infrared energy from human as control-signal source, Can start the load at once when one enters detection field. Can identify day and night automatically. Easy to install and used widely. Specification : Power Sourcing : 220V/AC-240V/AC Detection Range : 360° Power Frequency : 50Hz Working Temperature : -20~+40°C Ambient Light : 3-2000LUX (Adjustable) Working Humidity : <93%RH Time-Delay : min.10sec±3sec Max.7min±2min Installing Height : 2.2m~4m Power Consumption : 0.45W (work) 0.1W (static) Rated Load : 1200W (incandescent lamp) 300W (energy-saving lamp) Detection Motion Speed : 0.6~1.5m/s Detection Distance : 6m max (<24°C) Fcnction : 1.Identify day and night automatically. Can adjust ambient light according to your desire : when turn to SUN (max), it will work in the daytime and at night. When turn to MOON (min), it will only work under less than 3LUX circumstance. As for Adjustment, please refer to : ing way. 2.Time-delay is added continually : when it receives the second induction signal after the first inductor, it will compute time once more on the rest of the first time-delay basic (Set time) . 3.Time-delay adjustment : it can be set according to your desire. The minimum is 10±3 sec; the maximum is 7±2min. Installation : 1. Turn off the power. 2. Moving the transparent vinyl cover what is in the bottom of the sensor. 3. Loosing the screws in the connection terminal, connecting the power and rated load to connection terminal of sensor according to connection sketch map. 4. Tighten the screws; put the transparent vinyl cover into the original station. 5. Folding the metal spring of the sensor to upwards, until they are in “I” position with sensor, then put the sensor into the hole or installation box what is in the ceiling, the size is similar with item. Releasing the spring, the sensor will be set in this installation position. 6. After finishing installing, the sensor could be connected the power and : ing it. Test : 1. Turn the TIME knob anti-clockwise on the minimum, turn the LUX knob clockwise on the maximum (sun). 2. Turn on the power, the sensor will be electrify and warm-up,30 sec later, the item will be entered into working estate. 3. 5~10 seconds after the light goes out for the first time and then sensing, the load should be worked. 4. Turn LUX knob anti-clockwise on the minimum (moon). The inductor load should not work after load stop working. If you cover the detection window with the opaque objects (towel etc), the load work .under no induction signal condition, the load should stop working within 5-15sec. Note : when testing in daylight, please turn LUX knob to (SUN) position, otherwise the sensor lamp could not work! Note : 1.Should be installed by electrician or experienced man. 2.Avoid installing it on the unrest objects. 3.There shouldn’t be hindrance and moving object in front of the detection window effecting detection. 4.Avoid installing it near air temperature alteration zones such as air condition, central heating, etc. 5.Considering your safety, please don’t open the cover when you find the hitch after installation. Some problem and solvedway : 1.The load don’t work : a. Please check the power and load connect is correct. b. Check if the load is good. c. Check if the working light corresponds to the ambient light. 2.The sensitivity is poor : a. Please check if there is hinder in front of the detection window to effect receiving the signals. b. Please check if the ambient temperature is too high. c. Please check if the signals source is in the detection fields. d. Please check if the installation height corresponds to the height showed in the instruction. 3.The sensor can’t shut the load automatically : a. Check if there are continual signals in the detection fields. b. Check if the time delay is set to the longest. c. Check if the power corresponds to the instruction. d. Check if the temperature change obviously nears the sensor, such as air condition or central heating etc. Package included : 1 x 360 Degree Motion Sensor Detector Switch Details pictures :
Items will normally be processed on the next busiess day after order is procesed. A shipment tracking number and notification will be sent to the customer once items are dispatched. Bargain Flash Store cannot be held responsible for any delays in delivery caused by freight companies or intermediaries used.
The customer is responsible for the order once the package arrives at the supplied delivery address. Bargain Flash Store cannot be held responsible if the package goes missing once delivered. If any items are received damaged, the customer must notify Bargain Flash Store within 48 hours of receiving them. Please see returns policy below.
Bargain Flash Store cannot be held responsible for items that do not arrive to the customer due to errors made by the customer when entering the address details. Also note that the address must be accessible to courier drivers and if no shipping instructions are left then Bargain Flash Store needs to ensure that there is someone to receive the package.
Please also note that deliveries made to business addresses or at a place of work are considered received once they arrive at the address. It is the customer’s responsibility to ensure the item is safely received.
If you change your mind on a product purchased you are entitled to a refund on the purchase price (freight costs are not refunded) if you contact Bargain Flash Store within 21 days from date of receiving the product and advise Bargain Flash Store of the reason for the change of mind. You are entitled to a full refund of the purchase price if you provide us with the proof of purchase, all packaging/tags/instructions are attached to the item(s) and the product is in the same condition as when it was received (including all tags, packaging etc). Please note that the customer is responsible for the cost of returning the product to the address provided by Bargain Flash Store to the customer. Bargain Flash Store will provide a full refund of the purchase price within 21 days on confirmation of the product being received by Bargain Flash Store from the customer.
In the event of any items received being damaged or incorrect items received the following policy applies:
A. The customer is obliged to send through (photographic) evidence and a detailed explantion of the issue to Bargain Flash Store directly. These photographs need to be (digitally) date marked and sent to email@example.com citing the name, email address, and order number. Upon inspection/review Bargain Flash Store will decide upon one of three options:
I. The damage warrants a discount;
II. The damage warrants a refund; or
III. A new item will be sent out.
B. Refunds are applicable for the items only and do not include the price paid for shipping.
C. Bargain Flash Store reserves the right to deviate from the above if applicable to an individual case.